Replacement Swivel Blade Clamps for Mk. III Saws fret saw

Replacement Swivel Blade Clamps for Mk. III Saws fret sawThis replacement set of swivel blade clamps is for newer (post 2010) Mk. III saws only. They will NOT fit older (pre 2010) Mk. III saws, Mk. IV heavy duty saws, or Coping saws. If you have a birdcage titanium saw, these are the swivels you need. Replacement Instructions Use a 5 64" allen wrench to loosen the set screws in the clamp at the handle end of the saw and remove clamp. Replace with the new clamp, re tighten the set screws. Note the location

their teeth are set

It allows you to tilt your bench pin to the side so that you can either file more comfortably or look past the frame of your saw when sawing under a microscope

These things simply will not move

Stop if you see any screw sticking out of the back of the brass knob

yet is thin enough not to interfere with your stroke

for those wanting to do truly intricate marquetry

Marquetry Saw Handles

25" above the table

The dovetail bench mounting system has become the de facto standard quick-disconnect mount for bench accessories among serious jewelers

This is a cousin to our new Mk IV Die saw

(Or the long side of a 2x4

Herkules #5/0